Fence Calculator
Every part of the fence, from posts to the concrete in the holes.
- Fence run: 100 linear ft
- Posts: 14 posts (every 8 ft)
- Bays: 13 bays
- Rails: 39 rails (3 per bay)
- Rail board: 312 linear ft
- Post concrete: 27 bags (80 lb equivalent)
- Post gravel: 3.82 cu ft
Results stay in US units (cubic yards, square feet, short tons).
How this is calculated
- One bay = the gap between two posts; a gate replaces one bay.
- Pickets are butted with a small gap; no allowance for dog-ear spacing.
- Concrete volume subtracts the post itself from the hole.
- Does not include stain, post caps, or the gate hardware.
How this calculator works
Every number comes from the measurements you enter, with one stated waste allowance and one stated material density. Nothing is guessed from a national average.
Formula reviewed 2026-11-19. Units: feet, inches, cubic yards, short tons.
Frequently asked questions
How far apart should fence posts be?
Eight feet is the practical maximum for a wood fence; six to eight feet is normal. Closer spacing resists wind better and costs more posts.
How many bags of concrete per fence post?
Two to three 80 lb bags for a 10 inch hole 30 inches deep, after allowing for the post displacing concrete. The calculator does that subtraction for you.
How many pickets do I need for 100 feet?
About 209 at 5.5 inch pickets with a 1/4 inch gap. That is 1,200 inches of run divided by 5.75 inches per picket.
How deep should fence posts be set?
Below the frost line, which is 30 to 48 inches across most of the northern US and shallower in the south. Local code sets the minimum.