Deck Calculator

Board count and the framing that carries it.

ft
ft
in
ft
Results update as you type.
You need
39 boards
12 × 16 ft deck, 12 ft boards
  • Deck area: 192 sq ft
  • Decking linear ft: 418.91 linear ft
  • Joists: 10 joists (16 in o.c., 16 ft long)
  • Joist board: 160 linear ft
  • Rim/band board: 56 linear ft
  • Posts: 9 posts (8 ft spacing)
  • Footings: 9 footings (one per post)
  • Joist hangers: 10 pieces
How this is calculated
rows = round up (deck width × 12 ÷ board face) boards = rows × round up (deck length ÷ board length) × (1 + 10%) joists = round up (deck length × 12 ÷ spacing) + 1 posts = beam lines × posts per line
  • Boards run along the length; rows are counted across the width.
  • Nominal 2x material: joists are 1.5 in wide, decking uses actual face width.
  • Posts are placed on a grid, one footing per post. Frost depth and soil bearing are not checked.
  • Stairs, railings, lighting and hidden fasteners are separate line items.

How this calculator works

Every number comes from the measurements you enter, with one stated waste allowance and one stated material density. Nothing is guessed from a national average.

rows = round up (deck width × 12 ÷ board face) boards = rows × round up (deck length ÷ board length) × (1 + 10%) joists = round up (deck length × 12 ÷ spacing) + 1 posts = beam lines × posts per line

Formula reviewed 2026-11-19. Units: feet, inches, cubic yards, short tons.

Frequently asked questions

How many deck boards do I need?

Divide the deck width in inches by the board's actual face width to get the number of rows, multiply by how many boards each row needs, then add 10% for cuts.

What is the maximum joist spacing?

16 inches on centre for most 5/4 decking, 12 inches for composite boards that flex, and 24 inches only for thicker 2×6 decking rated for it.

How many footings does a deck need?

One per post. Posts are typically set every 8 feet along each beam line, and a beam line is needed about every 8 feet of span.

Do deck boards run parallel or perpendicular to the house?

Parallel is the usual choice: it looks calmer from the house and lets water run away from the wall. Perpendicular wastes more board at the ends.

Related