Gravel Calculator
Cubic yards and tons, plus how much one ton covers at your depth.
- Area: 300 sq ft
- Volume at depth: 50 cu ft
- Weight (order by the ton): 2.85 tons
- One ton covers: 115.71 sq ft (at this depth)
Results stay in US units (cubic yards, square feet, short tons).
How this is calculated
- Density 1.35–1.45 tons per cu yd for stone 57 (#57 crushed stone).
- Tonnage is calculated on the delivered (loose) volume, which is how quarries bill.
- Waste is 10% for spreading loss and a soft subgrade.
How this calculator works
Every number comes from the measurements you enter, with one stated waste allowance and one stated material density. Nothing is guessed from a national average.
Formula reviewed 2026-11-19. Units: feet, inches, cubic yards, short tons.
Frequently asked questions
How many tons of gravel are in a cubic yard?
#57 crushed stone runs about 1.35 to 1.45 tons per cubic yard; pea gravel and river rock are a little lighter, around 1.25 to 1.4. Always confirm with the quarry, because moisture and gradation move the number.
How much area does a ton of gravel cover?
At 2 inches deep, one ton of #57 stone covers about 115 square feet. Double the depth halves the coverage.
How deep should a gravel driveway be?
Four inches of surface gravel over a compacted base is the common minimum for a residential drive; six inches is better where the subgrade is soft.
#57 stone or pea gravel?
#57 locks together and stays put, which suits driveways and base layers. Pea gravel drains well and is comfortable underfoot, but it migrates and is hard to walk on with a wheelbarrow.